CPP prevents marine fouling and minimizes paint buildup.Formulated with CCT-Composite Copper Technology, West Marine CPP Ablative Antifouling Paint offers season-long antifouling protection with 35% less copper released into the environment. This self-polishing” formulation wears away, releasing fresh biocides as the boat moves through the water, providing excellent protection with minimal paint buildup. Effective in salt or fresh water and is compatible with most previously painted surfaces in good condition. For best performance, two or three coats per season are recommended.Key FeaturesComposite Copper Technology uses less copper more effectivelyEliminates paint buildup and heavy sandingSelf-polishing formulation keeps hull smoothOut of water storage will not reduce antifouling effectiveness35% less copper released into the environmentPhysical DataType:AblativeFinish: Matte Available Colors: Blue, Green, Red, BlackComponents: 1Curing Mechanism: Solvent releaseCoverage:500sq.ft/gal.; 125 st.ft/quartVOC:320 g/l max.Active Ingredients: Composite Copper 23.7%Flash Point:NoneApplicationApplication Method: Brush, roller, airless or conventional sprayNumber of Coats Recommended: 2 or 3 minimum, with additional coat(s) on leading edges and waterline recommended.Dry Film Thickness/coat: 2 milsApplication Temperature Min./Max. Range: 40F min./90F max.Thinner:Pettit 120 Brushing Thinner, Model 5437207Drying Times*(Hours) Drying @50F @70F @90F To recoat 6 hr. 3 hr. 2 hr. To launch 8 hr. 4 hr. 2 hr. *The above dry times are minimums. May be recoated after the minimum time shown. There is no maximum dry time before